Troubleshooting - Smartwares 281517 Instrucciones De Montaje, De Uso Y De Seguridad

Note: For details and more information, please refer to the included
tutorial CD .
4
Notice to Android users: Close the app after viewing the camera
image on your mobile. To do so, from the main screen in the app,
press and hold the respective button at the bottom left corner of the
display.
Note: Depending on the operating system and version you may not
have full access to all functions.

Troubleshooting

No image appears.
Check the display (LED) on the camera.
Verify the camera is connected to power with the included
adapter.
Check the connections of the Ethernet cable.
The camera does not respond, the camera image freezes.
To reset the camera, hold the Reset button for approx. 45 seconds
until both LEDs have simultaneously flashed several times. After re-
leasing the RESET button
the camera to reconnect to the network. After this, the red and
green LED will light up. The green LED will light up when the cam-
era is connected to the tethered network. The camera is now
again ready for use.
All settings will be reset to the factory settings. It will need to be
completely reconfigured.
42 GB/IE
it will take approx. 45 seconds for
10