Automatic Connection When Switching On; Tws Mode - Targa SilverCrest SLL 16 C1 Manual De Instrucciones E Indicaciones De Seguridad

SilverCrest SLL 16 C1
(5) button. Alternatively, you can disable the Bluetooth
currently connected Bluetooth
A beep will sound and the power/charging LED (11) will flash blue
rapidly. Pairing mode is now active and the speaker can be connected
to another Bluetooth
The speaker will switch off automatically after approximately
30 minutes if no connection is established. The process must
be restarted in this case.
The speaker will switch off automatically after approximately
30 minutes if no signal is received in Bluetooth
this time.

9.2.2 Automatic connection when switching on

The speaker automatically connects to the last connected Bluetooth
device when switched on.
If this is not the case, you will need to connect manually. Please consult
the operating instructions of your Bluetooth

9.3 TWS mode

By purchasing a second speaker of the same type (SLL 16 C1), it is
possible to pair both speakers and use them as a stereo speaker system.
A second speaker can be purchased at www.lidl.de/de/onlineshop [in
German].
TWS: 'True Wireless Stereo'.
This function allows two speakers to be coupled.
The left speaker acts as the main speaker, which is connected
to a Bluetooth
receives to the second (right) speaker.
44 - English
®
device.
®
device.
®
device . It transmits the audio signals it
®
®
®
device.
feature on the
mode within
®