Passing Through The Signals; Digital/Analog Audio Converter; Convert Toslink Or Coaxial (Spdif) To Rca - ClickTronic 60834 Manual De Instrucciones

USER'S MANUAL
4.1.3

Passing through the signals

Pass through the original signal optionally
by expanding one of the previous connec-
tion options from 4.1.1 or 4.1.2 by connecting
another output device on each unused
output.
4.2 Digital/Analog Audio
converter
4.2.1 Convert Toslink or Coaxial
(SPDIF) to RCA
TOS/COAX
1. Connect a Coaxial cable to the input of
the Digital/Analog Audio Converter
and to your source device.
2. Connect a Toslink cable to the output of
the Digital/Analog Audio Converter
and to your output device.
3. Connect the included power supply unit
to the Digital/Analog Audio Converter
and then to a mains socket.
The Digital/Analog Audio Converter is ready
to use, when the Operation LED shines.
4. Set the switch to „Coaxial".
5. Switch on all connected devices.
20
CLICKTRONIC
®