Installation - Wattio THERMIC Manual

All manuals and user guides at all-guides.com

Installation

IT IS IMPORTANT THAT YOU OBSERVE SOME SIMPLE PRECAUTIONS:
Even if the installation is very simple, it is recommended the installation to be done by a
professional. Please read and act upon the important information on the following pages.
Do not force or bend the cables at any point during
installation. It is recommended to switch off the
general energy supply system. To change the
batteries it is recommended to switch off the general
energy supply system.
THERMIC INSTALLATION STEPS:
First of all, it is important to write down the Identification code that you can see in the sticker
of the back side of the Thermic's frontal case. You will find a blank space to write it down in
the printed manual included in the pack. This code will have to be introduced during the
configuration process of the web platform, but do not worry; we will explain it later on.
NOTICE: To install the Thermic, it is recommended to place it 1.5 m above the floor and in an
area that does not receive direct sunlight or is exposed to heat or cold sources or to any
other element affecting the proper working way of the Thermic.
1. Remove the old thermostat.
23