Lexmark MarkNet N7000 Serie Guia De Instalacion página 9

Follow these steps if you are
connecting a print server to a
previously installed printer.
Step 8: Insert the MarkNet N7000
Series CD.
Follow the instructions on the screen. When prompted,
select the option to modify an existing printer.
Note: If you are unable to modify the printer as
described above, go to "Follow these
steps if you are Installing a new printer
and a new print server at the same time."
Step 9: Print a setup page from
the LCD.
1
Press until Menu appears. Press
2
Press until Reports appears. Press
3
Press until Setup Page appears. Press
Note: If your print server has multiple ports, you
must select a port before the page will
print.
Windows
Follow these steps if you are
Installing a new printer and a new
print server at the same time.
Step 8: Install the printer software.
1
Turn on your computer.
2
Insert the printer software or drivers CD that came
with your printer.
3
Follow the instructions on the screen to install
software for a network printer.
Step 9: Remove the drivers CD.
Step 10: Insert the MarkNet N7000
.
Follow the instructions on the screen. When prompted,
.
select the option to modify an existing printer.
.
Note: If your print server has multiple ports,
Step 11: Print a setup page from
1
Press
2
Press
3
Press
Note: If your print server has multiple ports, you
5
Series CD.
repeat steps 8 through 10 for each printer
you want to install.
the LCD.
until Menu appears. Press
until Reports appears. Press
until Setup Page appears. Press
must select a port before the page will
print.
.
.
.