Descargar Imprimir esta página

Kinderkraft GOSWIFT Manual Del Usuario página 15

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
Start assembling the bike by fixing the front fork (3.) to the wheel (4.) using the threaded pin (6.), a pin screw (7.), two
bushings (8.) and two Allen keys (9.). To do this, insert the pin through the hole in the frame, then insert the bushing, pass
it through the hole in the wheel, insert the second bushing and screw the pin screw to the pin with the Allen key (FIG. A).
Slide the assembled structure into the frame (1.). Make sure the latch on the top of the front fork is in front of the bike
(FIG. B). Then place the seal ring (5.) and the handlebar (2.) on the top of the front fork, first tilting the safety lever on the
handlebar to facilitate mounting (FIG. C). Close the safety lever once the handlebar is mounted on the fork (FIG. D). To
dismount the handlebar, tilt the safety lever (I), press button (II) as shown in Figure E and pull it out of the front fork. When
assembling the bike bell (11), first take out the screw and place the bike bell base on the steering bar, and then fix the
screw with the mounting spanner (10). The rear wheel must be mounted similarly to the front wheel using a threaded pin
(6.), pin bolts (7.) and two bushings (8.) (FIG. F). It is possible to adjust the saddle height using the screw underneath th e
saddle. To do so, loosen the screw with an Allen key, adjust the saddle to the correct height and tighten the screw. Note
that the symbol indicating the minimum depth of the insertion of the bracket must be placed inside in the frame (the
saddle must be inserted so that the arrow on the bracket is inside the tube, below the seat clamp) (FIG. G). CAUTION!
Before each use, check that all connecting elements (screws, pins, bushings) are correctly fixed. Keep small parts out of
reach of children.
III Maintenance and cleaning, storage
Clean the product with a damp cloth or sponge. Protect from dust, moisture, water, high and very low temperatures, falls,
etc.
IV Warranty
1. All Kinderkraft products are covered by a 24-month warranty. The warranty period starts from the date the product is
handed over to the Buyer.
2. The warranty is only valid in the member states of the European Union, excluding overseas territories (as currently
defined, including in particular: Azores, Madeira, Canary Islands, French Overseas Departments, Åland Islands, Athos,
Ceuta, Melilla, Helgoland, Büsingen am Hochrhein, Campione d'Italia and Livigno) and the territory of the United Kingdom
of Great Britain and Northern Ireland excluding the British Overseas Territories (e.g. Bermuda, Cayman Islands, Falkland
Islands).
3. The manufacturer's warranty does not apply to countries not listed above. The conditions of the additional warranty may
be determined by the Seller.
4. In some countries, it is possible to extend the warranty to a limited period of 120 months (10 years).The complete
terms and conditions and the warranty extension registration form are available at WWW.KINDERKRAFT.COM
5. The warranty is valid only in the territory indicated in paragraph 2.
6. Claims must be made by completing the form available at WWW.RMA.KINDERKRAFT.COM
7. The warranty does not cover:
A. Cosmetic damage, including but not limited to: scratches, dents and cracks in plastic, unless the failure is due to a materia l
or manufacturing defect;
B. Damage resulting from misuse or poor maintenance - including but not limited to: mechanical damage to products
caused by misuse or poor maintenance;
○ Refer to the instructions for use and installation of the product contained in the user manual;
C. Damage caused by improper assembly, installation or disassembly of products and/or accessories;
○ Refer to the instructions for use and installation of the product contained in the user manual;
D. Damage caused by corrosion, mould or rust, resulting from improper maintenance, care and storage;
E. Damage caused by normal wear and tear or otherwise resulting from the normal passage of time;
○ This includes: tears or punctures in inner tubes; tyre damage; tyre tread damage; fading of fabrics resulting from
mechanical use (e.g. on joints and covering of moving parts);
F. Damage or erosion caused by sun, perspiration, detergents, storage conditions or frequent washing, etc;
G. Damage caused by accident, abuse, misuse, fire, contact with liquid, earthquake or other external causes;
H. Products that have been modified to change functionality without 4Kraft's written consent;
I. Products from which the serial number or lot number has been removed or tampered with in any way;
J. Damage caused by the use of third party components or products - including but not limited to: cup holders, umbrellas,
reflectors, bells;
K. Damage caused by transport or by ground handling service providers.
8. The warranty period for accessories included with the product is 6 months from the date of sale, excluding the faults
described above.
15

Publicidad

loading