Installation Procedure - Motorola PMAN4002 Manual De Instalación

INSTALLATION PROCEDURE

1. Determine the installation location of the GPS magnetic
mount antenna, ensuring that the mounting surface is as flat
as possible and location is clean from debris and free of any
obstruction. Surface must be of a ferrous based material.
2. Place the antenna at the selected location. The antenna's
strong magnetic force will secure it to the vehicle's surface.
3. To secure the antenna more firmly on the vehicle's surface,
drill holes using the pattern shown in figure 1. To ensure a
long term, water-tight seal, it is recommended that a bead of
silicone sealant be applied around all the holes.
SERVICE
The GPS magnetic mount antenna is not repairable. Please order
a replacement as necessary.
Figure 1
1