Care And Maintenance - Kingfisher DG1903 Manual De Instrucciones

Care and Maintenance

Maintenance
The fan requires little
maintenance. Do not try to
fix it by yourself. Refer it to
qualified service personnel if
service is needed.
1. Before cleaning and
assembling, appliance
must be unplugged.
2. To ensure adequate air
circulation to the motor,
keep vents at the rear of
the motor free of dust.
Do not disassemble the
appliance to remove dust.
3. Please wipe the exterior
parts with a soft cloth
soaking a mild detergent.
4. Do not use any abrasive
detergent or solvents
to avoid scratching the
surface. Do not use any of
the following as a cleaner:
gasoline, thinner.
5. Do not allow water or any
other liquid into the motor
housing or interior parts.
194883_50593400193210_5059340019338_NONAME_A5_IM_Multi_V03.indb 12 194883_50593400193210_5059340019338_NONAME_A5_IM_Multi_V03.indb 12
Cleaning
1. Be sure to unplug from
the electrical supply
source before cleaning.
2. Plastic parts should be
cleaned with a soft cloth
moisten with mild soap.
Thoroughly remove soap
film with dry cloth.
3. To prevent scale
formation, please clean
the water tank once a
week and re-fill with fresh
water. If needed, clean the
water tank more often,
early dirty/unpleasant
odor.
4. If not used for a long time
(out of warm season):
empty water tank, clean
thoroughly and dry
carefully before storage.
Descaling: For descaling of
the water tank, put water and
vinegar or descaling solvent
in the tank, wait a few hours
and rinse with fresh water,
then use a soft, dry cloth to
wipe it.
12
13-12-2019 14:00:58 13-12-2019 14:00:58