Safety Warnings - Makita EM403MP Manual De Instrucciones Original

WARNING:
Read the instruction manual of
the attachment as well as this instruction manual
before using. Failure to follow the warnings and
instructions may result serious injury.
EC Declaration of Conformity
For European countries only
We as the manufacturers: Makita Europe N.V.,
Business address: Jan-Baptist Vinkstraat 2 3070
Kortenberg BELGIUM. Authorize Hiroshi Tsujimura
for the compilation of the technical file and declare
under our sole responsibility that the product(s);
Designation: Brushcutter & String Trimmer
Attachment / String Trimmer Attachment.
Designation of Type(s): EM404MP / EM406MP.
Fulfills all the relevant provisions of 2006/42/EC and
also fulfills all the relevant provisions of the following
EC/EU Directives: 2000/14/EC and are manufactured in
accordance with the following Harmonised Standards:
EN ISO 11806-1:2011, EN 50636-2-91:2014.
Place and date of declaration: Kortenberg, Belgium.
26.6.2019
Responsible person: Hiroshi Tsujimura, Director -
Makita Europe N.V.
Declaration of Conformity (For UK)
For UK only
We as the manufacturers: Makita Europe N.V.,
Business address: Jan-Baptist Vinkstraat 2 3070
Kortenberg BELGIUM. Authorize Hiroshi Tsujimura
for the compilation of the technical file and declare
under our sole responsibility that the product(s);
Designation: Brushcutter & String Trimmer
Attachment, String Trimmer Attachment. Designation
of Type(s): EM404MP / EM406MP.
Fulfills all the relevant provisions of S.I. 2008/1597 (as
amended) and also fulfills all the relevant provisions
of the following UK Regulations: S.I. 2001/1701 (as
amended) and are manufactured in accordance with
the following Designated Standards: EN ISO 11806-
1:2011, EN 50636-2-91:2014.
Place and date of declaration: Kortenberg, Belgium.
01. 07. 2020
Responsible person: Hiroshi Tsujimura, Director -
Makita Europe N.V.
Importer: Makita (UK) Limited, Michigan Drive,
Tongwell, Milton Keynes, Buckinghamshire, MK15
8JD, UK

SAFETY WARNINGS

Brushcutter safety warnings
WARNING:
instructions, illustrations and specifications pro-
vided with this machine. Failure to follow all instruc-
tions listed below may result in fire and/or serious
injury to the operator and/or bystanders.
Save all warnings and instruc-
tions for future reference.
The term "brushcutter" and "machine" in the warnings
and precautions refer to the combination of the attach-
ment and the power unit.
The term "motor" in the warnings and precautions refers
to the engine or electric motor of the power unit.
General safety
1. First-time or inexperienced operator should
ask the dealer for training in all operation of
the machine. Never allow children, persons
with reduced physical, sensory or mental
capabilities or lack of experience and knowl-
edge or people unfamiliar with the instructions
to use the machine.
It is recommended only to lend the machine
2.
to people who have proven to be experienced.
Always hand over the instruction manual.
Stay alert, watch what you are doing and use
3.
common sense when operating the machine. Do
not use the machine while you are tired, ill, or
under the influence of drugs, alcohol or medi-
cation. A moment of inattention while operating the
machine may result in serious personal injury.
4. Avoid using the machine in bad weather condi-
tions especially when there is a risk of lightning.
5. Follow your national and local regulation for
use of outdoor power machines.
Intended use of machine
This machine is only intended for cutting grass,
weeds, bushes and undergrowth. Never use the
machine for any other purpose such as edging or
hedge cutting. Use for unintended purpose may result
in serious injury.
Personal protective equipment
1. Always wear heavy, long pants, sturdy boots,
gloves, and a long-sleeve shirt. Do not wear
loose clothing, jewelry, short pants, sandals,
or go barefoot. Secure hair so it is above
shoulder level.
2. Always wear a helmet where there is a risk of
falling objects.
3. Always wear protective goggles to protect
your eyes from injury when using the machine.
The goggles must comply with ANSI Z87.1 in
the USA, EN 166 in Europe, or AS/NZS 1336
in Australia/New Zealand. In Australia/New
Zealand, it is legally required to wear a face
shield to protect your face, too.
12 ENGLISH
Read all safety warnings,