Windsor AXCESS 12 Instrucciones De Funcionamiento página 14

Maintenance
Removing Blockages
If your bag full indicator light remains lit after you have
changed bags and/or filters this is an indication that there
may be a blockage somewhere in your unit.
It is important to keep all areas of the system free from
blockage, as this may damage your unit or its components.
• Check for suction at the end of hose. If you can only
feel a small amount of suction, there is a block in
your hose.
To remove:
1. Loosen the safety ring on the lid.
2. Remove the hose from the machine.
3. Reverse the airflow through the hose by
putting the hose handle in the connecting
tube of the filter cover.
4. Stretch the hose in the spot where the
blockage may be and open/close the end of
hose until blockage is removed.
• Check the suction port at the opening for the hose
handle. Remove any debris you may find.
• Check the suction neck of the power head. Remove
any debris you may find.
• Check the trap-door on the bottom of the power
head. Remove any debris you may find.
• Check between the suction neck and trap-door
within the power head, as obstacles may become
lodged in the travel path. Remove any debris you
may find.
Never clean down the hose with a stick or pointed object.
14
All manuals and user guides at all-guides.com
86404610 Axcess
Safety Ring
Hose
Hose Handle
Filter Cover
Suction
Opening
Neck
Trap Door
Hose Handle
Opening
(Suction Port)