1. Attach two frames using spacer and two bolts.
(See Figure 1)
2. Attach legs to frames using two bolts each.
(See Figure 2)
PAGE 2 OF 6
ASSEMBLY
3. Insert levelers into holes on the bottom of the legs
and frames. Stand unit up.
4. Slide arms through J-hook twist-on arm into holes in the
Figure 1
top of each frame. (See Figure 3) Adjust J-hook twist-on
arm to desired height by tightening built-in screws.
Figure 2
1-800-295-5510
uline.com
NOTE: Press the button on the side of the J-hook
arm before inserting into post.
Figure 3
Button
0421 IH-3790