Accessories - Sharp SJ-LC11CTXIF-EU Manual De Uso

CHAPTER -3: USING YOUR FRIDGE

Accessories

Zero Degree Zone (In some models)
Keeping food in the Chiller compartment instead of the freezer or refrigerator
compartment allows food retain freshness and flavour longer, while preserving its
fresh appearance. When chiller tray becomes dirty, remove it and wash it with water.
(Water freezes at 0°C, but foods containing salt or sugar freeze at temperature lower
than that)
Normally people use the chiller compartment for raw fish, lightly pickled, rice, etc...
! Do not put foods you want to freeze or ice trays in order to make ice.
Removing the Chiller shelf
• Pull the chiller shelf out toward you by sliding on rails.
• Pull the chiller shelf up from rail to remove.
Fresh dial
If you want to keep your vegetables longer in that compartment, you have to
change the humidty controller that is located at the front of the crisper, to closed
position. With the aid of this function, humidty level in the crisper compartment,
will stay constant and vegetables will last longer.
If you want to keep your vegetables colder in that compartment, you have to
change the humidity controller to open position. By doing this change, you will
allow the cold air to enter the crisper compartment. As a result of this, your
vegetables will be colder.
If you see any condensation on the glass shelf that is located at the top of
crisper, you can change the humidity controller to open position.
Adapti-Lift Door Shelf (In some models)
Fig.1
Note: Before moving door shelf is loaded, you must hold the shelf by supporting the bottom. Otherwise, door shelf
could fall off the rails due to the weight. So damage may occur on the door shelf or rails.
Adapti-Shelf (In some models)
ADAPTI-Shelf mechanism provides higher storage spaces with
a simple movement.
• To cover the glass shelf, push it. (Fig. 1)
• You can place your food as you want in the resulting extra
space. (Fig. 2)
• To bring the shelf to its original position, pull it toward you.
(Fig. 1)
Visual and text descriptions on the accessories section may vary according to the model.
Cleaning
• Before cleaning your fridge, turn your mains supply off and remove the plug from the socket.
• Do not wash your fridge by pouring water on to it.
• Use a warm, soapy cloth or sponge to wipe the interior and exterior of your fridge.
• Carefully remove all shelves and drawers by sliding upwards or outwards and clean with soapy water. Do not
wash in a washing machine or dishwasher.
• Do not use solvents, abrasive cleaners, glass cleaners or all purpose cleaning agents to clean your fridge. This
may cause damage to the plastic surfaces and other components with the chemicals they contain.
• Clean the condenser at the back of your fridge at least once a year with a soft brush or vacuum cleaner.
Make sure that your fridge is unplugged while cleaning.
Six different height adjustments can be made to provide storage
areas that you need by Adapti-Lift.
To change the position of Adapti-Lift ;
Hold the bottom of the shelf and pull the buttons on the side of
the door shelf direction of arrow (Fig.1)
Position door shelf the height you need by moving up and down.
After you get the position that you want the door shelf, release
the buttons on the side of the door shelf (Fig.2) Before releasing
the door shelf, move up down and make sure the door shelf is
fixed
Fig. 1
EN -8-
Chiller shelf
Fig.2
Fig. 2