Use Of The Digital Touch Timer - Sharp K-60P19BNM-FR Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

start operating. This function is used for
faster grilling of thicker food and for grilling
of food with a larger surface area. Both the
upper heating elements and grill will be
energised along with the fan to ensure even
cooking. Use the upper shelves of the oven.
Lightly brush the wire grid with oil to stop
food sticking and place food in the centre of
the grid. Always place a tray beneath the
food to catch any drips of oil or fat. It is
recommended that you preheat the oven for
about 10 minutes.
Warning: When grilling, the oven door
must be closed and the oven
temperature should be adjusted to
190°C.

4.1 uSe of the DiGital touCh tiMer

Function Description
Time adjustment
The time must be set before you start using
the oven. Following the power connection,
the symbol " " and "0:00" will flash on the
display.
Double Grill and Fan
Function: The oven's
thermostat and
warning lights will
switch on, and the grill,
upper heating
elements and fan will
Auto cooking
Thermostat Symbol
Cooking end time
Cooking time
Key Lock
Minute minder
Mode function
Decrease timer
Increase timer
Timer display
1. Press the "+" and "-" keys simultaneously.
The dot in the middle of the screen will start
to flash.
2. Adjust the time while the dot is flashing
using the "+" and "-" keys.
3. After a few seconds, the dot will stop
flashing and will remain illuminated.
Key Lock
The key lock automatically activates
after the timer has not been used for 25
seconds. " " symbol will appear and remain
illuminated. To unlock the timer buttons,
press and hold the " " button for 2 seconds.
The desired operation can then be carried
out.
Audible warning time adjustment
The audible warning time can be set to
any time between "0:00" and "23:59"
hours. The audible warning time is for
warning purposes only. The oven will not be
activated with this function.
1. Press " ". The symbol
flash and "0:00" will be displayed.
2. Select the desired time period using the
"+" and "-" keys while
EN - 14
will begin to
is flashing.

Publicidad

Tabla de contenido
loading

Tabla de contenido