Power Button - LOKMAT APPLLP 6 Manual

2) Connect the Pogo data cable to the power adapter, and then charge the watch.
3) It is strictly forbidden to connect the Pogo charging cable to metal products, otherwise it may cause a fire.
Solution for charging failure:
1) If the connection of the charging cable is unstable, please reconnect the data cable and the charger.
2) The device cannot be turned on or charged, please use a 5V/1A or higher charger to charge the device for
more than 20 minutes to activate the battery.
Button definition

Power button:

1）Press and hold for two seconds in the power-on state to enter the menu selection: round
screen/shutdown/restart/mode switch/recent task ; 2）If the watch freezes due to improper operation, press
and hold the power button for 10 seconds to force the watch to restart.
Return key: Short press once to return to the previous menu interface
Sliding operation ： 1 ）
information, date) ； 2）
Bluetooth, WIFI, GPS, etc.) ；3）Swipe left on the watch dial interface to enter the main menu；4）Swipe right on
the watch dial interface to enter the message notification interface；5）Swipe up on the watch dial interface to
enter the step counter interface
Main menu function introduction
Slide down the dial interface to display basic information (battery, time, SIM card
Continue to slide left to enter the secondary status bar (quick switches such as flight mode,
2