Safety Instructions - Triton Blue TR-3256-250 Manual De Usuario

SAFETY INSTRUCTIONS

WARNING !!! To reduce the risk of fire, electric shock, or injury to persons, follow
these important safety instructions:
All the people related to the equipment installation and maintenance must:
• With electrical technician qualifications. Every person involved with the installation, operation and maintenance of
this device has to be qualified and follow the instructions of this manual. Manufacturer will not with responsibility
for those operations which are not according to this Instruction.
• To ensure that these equipment are normal and safe operation, the user must comply with the following safety
rules and precautions of this manual.
• Key: manufacturer is not responsible for the accident and loss raised by un-normal operation not in accordance
with this instruction or modify the equipment without permission.
EQUIPMENT INSTALLATION AND MAINTENANCE
• Pay special attention to that if power supply voltage is consistent with the host marking, ensure that the voltage is
in the identified voltage range of technical parameters.
• Please check before use connected 230V AC, make sure the power switch socket wiring is good. To ensure the safety
use of the power, please use the socket of acceptable quality or cut the plug and directly connect switch.
• When moving and installing the light, please avoid to knock the hard object of metal.
• Before usage, please check if the light is damaged or the screw is loose for transportation.
• Verify that the voltage matches the rated voltage.
• When the voltage is 230V, Do not connect more than 20 lightings in total to AC mains power in one interconnected
daisy chain .
• Before using the fixture, check that all power distribution equipment and cables are in perfect condition and rated
for the current requirements of all connected devices.
• Always ground (earth) the fixture electrically.
• Avoiding hit the Light when you are move or install the light.
• The minimum distance between light-output and the illuminated surface must be more than 0.5 meters. Keep all
combustible materials (for example fabric, wood, paper) at least 0.2 meters away from the fixture.
• Do not expose the fixture to rain or moisture.
• Avoid looking directly into the light source (especially those who suffer from epileptic fits)
• Maximum ambient temperature (Ta) is 40°C. Do not operate fixture at temperatures higher than this.
• The Maximum surface temperature is 50°C.
• When suspending the fixture above ground level, verify that the structure can hold at least 10 times the weight of
all installed devices.
• Verify that all external covers and rigging hardware are securely fastened and use an approved means of secondary
attachment such as a safety cable.
12.
Manual de usuario TR-3256-250 de Triton Blue | Agosto 2021 | www.triton-blue.com