Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
A
Preview of the appliance
Description of the appliance
1
Water supply hose
2
Detergent dispenser
3
Door
4
Top cover
5
Control panel
6
Power supply cord
7
Drum
8
Service flap
9
Drain hose
10
4 x Cover caps
11
1 x Supply hosecold water
NOTE
The product picture is for illustration only, please refer to real product as reference.
4
EN
B
Using the appliance
Installation
W≥20mm
Installation area
WARNING!
•
Stability is important to prevent the product from wandering! Make sure the
machine is standing leveled and stable.
•
Make sure that the product does not stand onto the powercord.
•
Make sure to maintain the minimum distances from the walls as shown in
the picture
Before installing the machine, the location characterized as follows shall be selected:
ΠRigid, dry, and level surface
Avoid direct sunlight
Ž Sufficient ventilation
Room temperature is above 0°C
Keep far away from the heat sources such as coal or gas burning appliances.
Unpacking the washing machine
WARNING!
•
Packaging material (e.g. Films, Styrofoam) can be dangerous for children.
•
There is a risk of suffocation ! Keep all packaging well away from children.
ΠRemove the cardboard box and styrofoam packing.
Lift the washing machine and remove the base packaging.Make sure the small triangle
foam (a) is removed with the bottom packaging together. If not, lay the unit down on the
side surface and remove it manually.
Ž Remove the tape securing the power supply cord and drain hose.
Remove the inlet hose from the drum.
5
EN
Publicidad
Capítulos
Tabla de contenido
Solución de problemas
