Chal-tec fun pro 1 Manual Del Usuario página 10

EN
10
2. Adjust height
You can use the height adjustment to adapt the handlebar to the height of the
person riding. Ideally, the arms are bent at the elbow by about 45°.
1. Open the quick release (A) by
pulling it towards you.
2. Gently press in the locking
button (B) on the right-hand
side. As soon as the upper
handlebar is no longer held, you
can change the height of this
handlebar.
3. Pull the upper handlebar rod
into the desired position. Make
sure that the locking button is at
the level of one of the openings
in the lower handlebar and has
engaged. The upper handlebar
must not move after you have let
go.
4. Schließen Sie nun den
Schnellspanner, indem Sie diesen
von sich weg zum Roller hin
drücken.