Chal-tec fun pro 2 Manual Del Usuario página 10

EN
10
2. Adjusting the height
The height adjustment can be used to adjust the handlebars to the height of
the driver. Ideally, the arms should be angled about 45° at the elbow.
• You can pull out the handlebars
as far as they will go. The
handlebars lock and a pin locks
(A) into the safety hole.
• You can also lock the handlebars
in any other position. To do this,
tighten the Allen screw on the
back of the quick release
• (B) and close the quick release.
• As an adult, test with your
weight to see if the handlebar is
securely locked. If you can still
move the handlebars, tighten
the screw further.