Remote Control - LUMIT JURA Manual De Instrucciones

MANUAL DE INSTRUCCIONES
JURA
REF. 202495602 • 20249562

REMOTE CONTROL

_____________________________________________________________________________
+ BRIGHTNESS
LIGHT ON/OFF
– LIGHT
TEMPERATURE
REMOTE
CONTROL
CONNECTION
FAN SPEED
CONTROL
TIME CONTROL
(TIMER)
Press the button and after
the beep, the fan runs for
2 hours.
LIGHT COLOR
CONTROL
MESH ROTATION
CONTROL (ON/OFF)
Remote control pairing: turn on the control and press the con-
nection button for 5 seconds. When you hear a beep, the remote is
paired correctly.
INSTALLATION
_____________________________________________________________________________
1. Drill the most suitable local on the ceiling. The mounting support
should be screwed to a flat, firm surface. The mounting location
must be able to support ten times the static weight of the fan.
2. Position the fixation support in a cross shape and fix it with the
screws. Make sure they are well tight.
FAN
ON/OFF
+ LIGHT
TEMPERATURE
– BRIGHTNESS
3. Connect the fan cables to the 230V power supply. Check for
proper operation, then carefully place the receiver, transformer, and
all cables in the ceiling cup. Do not bend or break the thread. Make
sure to align the holes in the fan with the holes in the cross-shaped
support.
4. Tighten the screws in the aligned holes. Make sure they are alig-
ned properly.
[ EN ]
CEILING CUP
2