Product Characteristics; Technical Data; Instructions - YATO YT-82181 Manual Original

PRODUCT CHARACTERISTICS

Abrasive cutting machine is a versatile tool, designed for cutting metal elements with abrasive blades (abrasive discs) with a
resin binder. Thanks to the adjustment it is possible to cut straight and angular. The correct, reliable and safe operation of the tool
depends on proper operation, that is why:
Before you start working with the tool, read the entire manual and keep it.
The supplier is not liable for damages resulting from non-compliance with safety regulations and recommendations in this manual.
EQUIPMENT
The original packaging should include:
- cutting machine
- abrasive disc

TECHNICAL DATA

Parameter
Catalog number
Rated voltage
Nominal frequency
Rated power
Nominal rotation
Max. Cutting depth
Cutting depth at 90 ° (square profi le)
Cutting depth at 90 ° (rectangular profi le)
Cutting depth at 90 ° (angle bar)
Cutting depth at 90 ° (round profi le)
Cutting depth at 45 ° (square profi le)
Cutting depth at 45 ° (rectangular profi le)
Cutting depth at 45 ° (angle)
Cutting depth at 45 ° (round profi le)
Abrasive blade: outside diameter x fi xings diameter x max. thickness
Weight
Noise level
- sound pressure L ± K
pA
- power L ± K
wA
Insulation class
Level of security
GENERAL WARNINGS FOR THE SAFETY OF POWER TOOLS
Warning! Read all safety warnings, illustrations and specifi cations provided with this power tool. Failure to do so may
result in electric shock, fi re or serious injury.
Keep all warnings and instructions for future reference.
The term "power tool" used in warnings applies to all tools driven by power both wired and wireless.
Workplace safety
Keep the workplace well-lit and clean. Disorder and poor lighting can be causes of accidents.
Do not work with power tools in an environment with an increased risk of explosion, containing fl ammable liquids, gases
or vapors. Power tools generate sparks that can ignite dust or fumes.
Children and third persons should not be allowed to enter the workplace. Loss of concentration can result in loss of control.
Electrical safety
The plug of the electric cable must match the power socket. You must not modify the plug in any way. Do not use any
plug adapters with earthed power tools. An unmodifi ed plug that fi ts the outlet reduces the risk of electric shock.
Avoid contact with earthed surfaces such as pipes, radiators and coolers. Grounding the body increases the risk of electric shock.
O R I G I N A L
14
GB
Unit of measure
[V]
[Hz]
[W]
[min ]
-1
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[kg]
[dB(A)]
[dB(A)]
I N S T R U C T I O N S
Value
YT-82181
~230
50
2450
4000
110
110 x 110
110 x 130
135 x 135
110 / 60
110 x 110
110 x 130
100 x 100
110
355 x 25,4 x 3
17,2
95,8 ± 3,0
108,8 ± 3,0
I
IPX0