Product Characteristics; Technical Data; Instructions - YATO YT-82158 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 89

PRODUCT CHARACTERISTICS

The concrete cutter is an ordinary power tool, with class II insulation, designed to cut concrete, including reinforced concrete
and similar ceramic materials, with help of diamond discs. Cutting can be done both dry and wet. The correct, reliable, and safe
operation of the tool depends on its proper use, therefore:
Read this entire instruction manual before the fi rst use of the tool and keep it for future reference.
The supplier shall not be liable for any damage resulting from failure to comply with the safety instructions and recommendations
specifi ed in this instructions manual.
ACCESSORIES
The factory packaging should contain:
- cutter
- diamond disc
- supporting wheels
- water hose
- rear guard

TECHNICAL DATA

Parameter
Part number
Rated voltage
Rated frequency
Rated power
Rated speed
Max. cutting depth
Disc: outer diam. x fi xing diam. x max. thickness
Weight
Noise level
- sound pressure L
± K
pA
- power L
± K
wA
Vibration level
Insulation class
Protection rating
Water pressure
The declared total vibration emission value and declared noise emission value have been measured using the standard test
method and can be used to compare one tool to another. The declared total vibration emission value and declared noise emission
can be used in the initial exposure assessment.
Caution! The vibration emission during tool operation may diff er from the declared value, depending on the manner the tool is used.
Caution! Safety measures to protect the operator, which are based on an assessment of emission exposure under actual condi-
tions of use (including all parts of the work cycle, such as the time when the tool is switched off or idle and the activation time),
must be specifi ed.
GENERAL WARNINGS FOR THE SAFETY OF POWER TOOLS
Warning! Read all safety warnings, illustrations and specifi cations provided with this power tool. Failure to do so may
result in electric shock, fi re or serious injury.
Keep all warnings and instructions for future reference.
The term "power tool" used in warnings applies to all tools driven by power both wired and wireless.
Workplace safety
Keep the workplace well-lit and clean. Disorder and poor lighting can be causes of accidents.
Do not work with power tools in an environment with an increased risk of explosion, containing fl ammable liquids, gases
or vapors. Power tools generate sparks that can ignite dust or fumes.
O R I G I N A L
16
GB
Unit
[V~]
[Hz]
[W]
[min
]
-1
[mm]
[mm]
[kg]
[dB(A)]
[dB(A)]
[m/s
]
2
[MPa]
I N S T R U C T I O N S
Value
YT-82158
220 - 240
50/60
2600
4300
125
355 x 25.4 x 3
10
99.0 ± 3.0
110.0 ± 3.0
8.22 ± 1.5
II
IP20
0.1 – 0.5

Publicidad

Tabla de contenido
loading

Tabla de contenido