Handy Features (For Tv/Av Mode); Pausing The Screen (Freeze); Switching Power Off After A Specified Length Of Time (Sleep) - Sharp IT-23M1U Manual De Funcionamiento

Handy features (for TV/AV mode)

Pausing the screen (FREEZE)

This feature pauses the image from the TV or other
connected AV equipment. This is handy when you
want to write down a recipe or the address for a
prize contest.
POWER
PC
FREEZE
SLEEP
BRIGHT
MODE
1. Press the FREEZE button.
The images will pause.
Canceling pausing
1. Press the FREEZE button again.
Notes:
- You cannot pause the image displayed in the
PIP/SPLIT window.
- Changing channels or switching the display
mode (input) automatically cancels pausing.
- The screen size cannot be changed using the
VIEW MODE button while an image is paused.
The SCREEN ADJUST menu also cannot be
adjusted while an image is paused.
IT-23M1U_gb_02.P65
All manuals and user guides at all-guides.com
Virtual
TV AV1 AV2
MULTI VIEW MODE
MENU
ENTER
BRIGHT
49
Switching power off after a specified
length of time (SLEEP)
The monitor can automatically switch off (standby)
after a specified length of time. This is handy if you
want to watch the monitor at bedtime.
POWER
PC TV
FREEZE MULTI
SLEEP
ENTER
BRIGHT
MODE
DISPLAY CC
1. Press the SLEEP button.
2. Specify in how many minutes you want the
monitor to switch off by pressing the SLEEP
button.
The time changes in the following order each
time you press the button:
30 min 60 min 90 min
150 min --- min 30 min
When the specified time elapses, the monitor
automatically switches off and clears the SLEEP
timer.
Checking the time remaining on the SLEEP
timer
1. Press the DISPLAY button.
The time remaining on the SLEEP timer will be
displayed for about 5 seconds. You can also
check the time remaining by pressing the SLEEP
button once.
Changing the specified time
1. Press the SLEEP button.
The remaining time will be displayed.
2. Change the specified time by pressing the
SLEEP button several times as needed.
Notes:
- When there are only 5 minutes remaining on the
SLEEP timer, the remaining time will be
displayed every minute.
- Pressing the POWER button while the SLEEP
timer is operating will clear the timer.
- Switching to PC mode automatically clears the
SLEEP timer.
- You can also set the SLEEP timer from the
MODE SELECT menu. (See page E52.)
E49
2004/08/20, 10:44
Virtual
AV1 AV2
VIEW MODE
MENU
BRIGHT
MTS MUTE
120 min