LG ST-43HF Manual Del Usuario página 3

How to Prevent TV from Falling
1 If necessary, secure the brackets on the back of
the product and the wall, as shown in the figure.
Secure the product brackets and wall brackets at
the same height.
2 Verify that the product brackets and wall brackets
are firmly fastened.
3 Using a strong cord, tie and connect the product
brackets to the wall brackets. When moving a
product installed in this way, please untie the cord
first.
• Make sure to level the monitor when installing it.
• It is safe to install the product according to the
installation method to prevent the damage
to the product or personal injury even if the
product is pulled forward.
• Install the monitor close to the wall so that it
does not fall backwards, even when pushed.
• The brackets, screws, and cords must be
purchased separately as they are not provided
with the product.
Adjusting the Floor Stand Height
• The height of the monitor can be adjusted, as
shown in the figure.
Adjusting the Floor Stand Screen
Orientation
• The screen orientation can be adjusted, as shown
in the figure.
3