Getting Started And General Use - Impecca Courant KEC176ST Manual De Usuario

GETTING STARTED AND GENERAL USE

Note: Before the first use, remove the mesh filter, fill the kettle with clean water
until maximum level, boil and empty and discard the water. Repeat this process
again and then re-insert the mesh filter.
1. Plug the power cord it into a wall outlet.
2. Open the lid (using the lid release) and fill the kettle with water.
Do not allow the water to rise above the maximum level or below the mini-
mum level.
3. Close the lid and place on the power base. (Note that the lid has an extra
strong hinge for durability. May require extra force.)
4. Switch kettle on by pressing up on the switch towards the bottom of the
kettle (see picture above). The switch should glow blue while the kettle is
in operation.
5. The kettle will turn off automatically when the water has reached the boil-
ing point. The switch will flip off and the blue LED will extinguish.
If you want to re-heat the water, wait at least 30-60 seconds before turning
the kettle back on.
6. Lift the kettle by the handle and pour the water as desired. Be careful not to
get burned by the steam coming up from the spout area.
All manuals and user guides at all-guides.com
–5–