CHICCO Oasys
i-Size
IMPORTANT - KEEP THESE INSTRUC-
TIONS FOR FUTURE REFERENCE.
INSTRUCTIONS FOR USE
1. INTRODUCTION
1.1 Warnings
1.2 Product features
1.3 Description of the parts
1.4 Positions of the handle
1.5 Restrictions and requirements regarding
the use of the product and car seat
2. CAR INSTALLATION
2.1 Installation and removal of the i-size base
2.2 Installation of the oasys i-size child car seat
on the i-size base
2.3 Installation of the oasys i-size child car seat
with the car's 3-point seat belts
3. ADDITIONAL OPERATIONS
3.1 Placing the child in the child car seat and
adjusting the safety harness
3.2 Use as reclined cradle
3.3 Use with the stroller
3.4 Canopy
3.5 Cleaning and storage
ence.
sembling and installing the product. Do not
let anyone use the product unless they have
read these instructions.
According to accident statis-
tics, a vehicle's rear seat is generally safer
than the front seat: therefore it is rec-
ommended to install the i-Size base and
the child car seat on the rear seats. More
specifically, the central rear seat is the
safest seat when fitted with a 3-point safety
belt.
this device fitted on front vehicle's seats
equipped with a front airbag. It is possible to
fit the i-Size base and the child car seat on
a front seat only if the front airbag has been
deactivated: check with the car manufacturer
or in the owner's manual for instructions on
how to disable the airbag. It is always recom-
mended to slide the vehicle seat as far back
as possible depending on whether passen-
gers are travelling on the back seat or not.
Make sure that all the passengers within the
vehicle know how to release the child from
the child car seat in case of emergency.
When fitting the i-size base and the child car
seat into the car pay attention to avoid the
vehicle seat from potentially interfering with it.
guarantee your child's safety in the case of an
accident, but using this product reduces the
risk of serious injuries or death.
es, not only in the case of accidents, but also
in other circumstances (i.e.: sudden braking,
etc.) if these instructions are not followed
carefully: always make sure that the i-Size
base and the child car seat are correctly fas-
tened to the seat.
damaged, deformed or very worn, they must
be replaced as their original safety features
may have been compromised. After an acci-
dent (even minor ones) the i-Size base and
even if not visible to the naked eye. Therefore,
-
they must be replaced.
This product must not be modified in any
-
way unless the modification has been ap-
proved by the manufacturer.
components not supplied or approved by
the manufacturer.
car seat for any reason.
seat unsecured on the vehicle seat, it may
hurt or harm the passengers.
cessory between the i-Size base and the seat
Never use
or between the vehicle seat and the child car
19
-
-