Bellman & Symfon BE1491 Manual Del Usuario página 17

Testing
1 Stand by the child's bed and make a noise.
2 The Visit receiver lights up a pacifier symbol and indicates with sound, lights
or vibrations (depending on the receiver). If it doesn't react, read the section
Settings.
1
29
2
2
Settings
The buttons for sensitivity and delay are located on the baby monitor's left side.
When you press the button, the LED shows the current setting. Then press
repeatedly to adjust the setting.
 If the baby monitor isn't activated when the baby cries – increase the sensitivity.
If the baby monitor is activated too easily – reduce the sensitivity.
If the baby monitor is activated too fast or too slow – adjust the delay.

Sensitivity
Red LED 65 dB
Orange LED 75 dB
Green LED 85 dB
Delay
Red LED 30 s
Orange LED 10 s
Green LED 1 s
EN
30