Technical Information; Additional Information - Bellman & Symfon BE1491 Manual Del Usuario

Installing a contact mat
By using a contact mat, you can also be notified if your child gets out of bed. Just
place the mat in front of the crib, connect it to the baby monitor and it will tell you
when your child steps on it.
31
BE9026 Contact mat
(sold separately)

Technical information

Power supply Battery power: 2 x 1.5 V AA (LR6) lithium or alkaline batteries.
Power consumption Active < 70 mA, Idle position < 400 μA
Operating time
Alkaline ~ 6 months, Lithium ~ 1 year
Activation Via the test buttons, microphone or a contact mat via the ext trig
Radio frequency 314.91 MHz, 433.92 MHz or 868.3 MHz depending on region
Maximum output power 4,7 dBm
Coverage
50 - 250m (55 - 273yd) depending on radio frequency. Coverage
is reduced by walls, large objects and other radio transmitters.
Number of radio keys 64 as standard. Up to 256 with optional software.

Additional information

Please note: Always make sure the baby monitor is out of the child's reach.
Never place the baby monitor in the child's crib or playpen.
Operation, transport and storage For information, see the Installer's Guide.
Maintenance and cleaning Maintenance free. Clean with a dry cloth. Don't use household
cleaners, aerosol sprays, solvents, alcohol, ammonia, or abrasives.
Safety and regulations For information, see the Installer's Guide.
Service and support For information, see the Installer's Guide.
EN
32