Assembling Your Smoothie Maker - West Bend AUTOSERVE II Manual De Instrucciones

A
SSEMBLING
Before assembling your smoothie maker, wash all parts, except for the motor base
in warm, soapy water, rinse thoroughly and dry. Unscrew and disassemble the valve
for cleaning (see Cleaning Your Smoothie Maker section). To prolong the life of your
smoothie maker, do not wash parts in the dishwasher.
1. Position the rubber gasket down onto the circular flat surface in the blade base.
2. Screw the blade base on the bottom of the blending jar by turning the blade
base counter-clockwise until tightened. Make sure that the blade base is tightly
fastened to the blending jar and that the rubber gasket is properly compressed
between the blending jar and the blade base.
3. Place the lid onto the top of the blending jar. The lip on the lid should line up
with the pour spout on the container. Place the lid cap in the center of the lid or
place the stir stick through the center of the lid if blending liquids or frozen
drinks.
4. Place the blending jar onto the motor base so the bottom of the blade base is
sitting flat on the motor base.
5. Plug in the cord.
6. Your smoothie maker is now ready to use.
Stir Stick
Lid
Lid Cap
Blending Jar
Dispensing Valve
Auto-Powered
Dispensing Button
All manuals and user guides at all-guides.com
Y
OUR
4
S M
MOOTHIE AKER
Rubber Gasket
Blade Base
Motor Base