Cleaning Your Smoothie Maker - West Bend AUTOSERVE II Manual De Instrucciones

4. SERVE IT – To serve the smoothie, simply press your glass against the auto-
powered dispensing button on the motor base. This automatically runs the
motor at a low speed and dispenses smoothies and other blended drinks into
your glass. When your desired serving size is reached, remove your glass from
under the valve. This releases the dispensing button and the appliance will
automatically turn off. Stir the contents in the blending jar with the stir stick
while dispensing thick smoothies. As the smoothie level reaches the bottom of
the blending jar, a thick mix may stop dispensing. Add a few tablespoons of
liquid to increase flow. When the blending jar is empty, turn the appliance "OFF"
and enjoy.
You can continue making smoothies one after another, but be sure to give the
smoothie maker a 3 minute break after 90 seconds of continuous use.
•
Boost the dispensing speed by depressing the "PULSE" button while pressing
your glass against the dispensing lever. This will override the dispensing speed
and increase the flow of smoothie through the valve. When your desired level is
reached, remove your finger from the "PULSE" button and your glass from
under the valve.
•
To make a thicker drink, add more frozen ingredients.
•
To make a thinner drink, add more liquid ingredients.
C
1. Switch to "OFF" and unplug from electrical outlet.
2. Wipe the motor base with a damp cloth or sponge. To remove stubborn spots,
use a mild, non-abrasive cleanser.
3. Remove the blade base assembly and rubber gasket from the blending jar.
Unscrew and disassemble the dispensing valve. Carefully wash all parts except
the motor base in warm, soapy water, rinse and dry thoroughly. To prolong the
life of your smoothie maker, do not wash parts in the dishwasher.
All manuals and user guides at all-guides.com
Y S
LEANING OUR
6
M
MOOTHIE AKER