Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
does not arrive at the air tool if the hose is longer.
quick coupling adaptor has to be connected to
the other end of the mini oil-fog lubricator. Add
small screw of the mini oil-fog lubricator.
Hose up to 5m
Hose up to 10m
Once a min
If it is not intended to use an oiler, put a few drops
tool for a long period.
WD WE
WC
WB
WA
A. Air Tool
B. Quick Coupling Adaptor
C.
sides
D. Quick Coupling Adaptor
E. Quick Coupling
F. Valve
G. Oil-fog Lubricator
H. Pressure Regulator
I. Filter Unit
J. Air Source (Compressor)
1 drop
1 drop
WG
WI
WF
WH
WJ
Air Volume/Air Pressure
Run the air impact wrench with a pressure of
6.2 bar (90 psi), use a compressor with an air
using higher pressure than maximum allowed
pressure of 7 bar, its life span will be reduced
l/min.
The air hoses should have an inner diameter
when using a 10m long hose with an inner
diameter of 9mm.
Storage
into the intended slots.
The tool has to be stored in a dirt- and dust-free
degrees Celsius.
www.DeubaXXL.de
12
Publicidad
Tabla de contenido
