Publicidad
FEATURES
KNOW YOUR TOOL
This URREA UPS15 Hand Riveter is an easy to use
industrial grade hand riveter. With this riveter
you can easily fasten sheet metal or any other
applications with blind rivets.
1
1. NOZZLE.
2.
ADDITIONAL
NOZZLES.
3. WRENCH FOR
CHANGING NOZ-
ZLES.
SPECIFICATIONS
This URREA UPS15 Hand Riveter is capable of
setting rivets of the materials and sizes below:
MATERIAL
INCH
ALUMINUM, STEEL
3/32" - 3/16"
STAINLESS STEEL
3/32" - 5/32"
(INOX)
OPERATION INSTRUCTIONS
OPERATION
1. Select nosepiece for the size of blind rivets to
be used.
2. Remove and replace the nosepiece with the
wrench located in the handle.
3. Hold down the handle while replacing the
nosepiece.
4. Insert rivet into nosepiece while handle is
open.
5. Place the riveter for operation.
6. Press down the handle.
7. When handle be released the rivet stem will
come out.
WARNING!
· Keep out of reach of children.
· Wear safety glasses while tool is being oper-
ated.
2
METRIC
2.4 mm - 4.8 mm
2.4 mm - 4 mm
· Keep bystanders and children away while tool
is being operated.
MAINTENANCE
CUTTING MECHANISM MAINTENANCE IN-
STRUCTIONS
1. Carefully unscrew the jaw case screw (6).
2. Take out the parts (2,3,4) inside the jaw case
(5).
3. Remove any accumulated burr or scraps due
to rivet stem cutting process.
4. Assemble carefully all the parts in the correct
order.
3
ATTENTION: if you want to maintain the
correct performance of the tool, repeat this
process every 6 months or when 300 cycles are
completed.
TROUBLESHOOTING
RIVET CANNOT BE INSERTED
Wrong nosepiece is used. Choose the correct
nosepiece.
Handles are not open. Open handles then insert
rivet.
TOO MANY STROKES ARE NEEDED TO SET RIVET
Wrong nosepiece is used. Nosepiece used is for
larger size rivet. Choose the correct nosepiece.
RIVET STEM DID NOT COME OUT
Handle is not opened. Open handles.
E N G L I S H •
Us er 's M an u a l
3
Publicidad
