Terratek TBG150 Manual Del Usuario página 15

Package contents
A) Grinder
B) Eye shields and hardware
C) Tool rests and hardware
D) User manual
Functional Description
WARNING:Disconnect the plug from the power source before making any assembly,
adjustments or changing accessories. Such preventive safety measures reduce the risk
of starting the tool accidentally. (Fig.A)
Stability of the bench grinder
If there is any tendency of the bench grinder to tilt or move during any use, bolt it to
the bench top or to a piece of 3/4" exterior plywood large enough to stabilize the grinder.
Bolt the plywood to the underside of the base so it extends beyond the sides of the base.
DO NOT USE PRESSED WOODS PANELS. They can break unexpectedly.
If the workpiece is too large to support with one hand, provide an auxiliary support.
Assembly
WARNING:Disconnect the plug from the power source before making any assembly,
adjustments or changing accessories.
How to assemble the bench grinder
1)Assemble eyeshield. (Fig.1)
2)Attach tool rest and adjust knob. (Fig.2)
3)Remove eyeshield and protective sleeve. (Fig.3)
4)Always mount on a stable/level surface (mounting holes provided, aquire appropriate
hardware). (Fig.4)
How to replace the grinding wheel
1) Take off the three screws on the wheel guard. (Fig.5)
2) Remove the wheel guard. (Fig.6)
3) Use spanner to take off the screw nut for wheel. (Fig.7)
4) Wheel assembly parts. (Fig.8)
5) After changing wheel make sure you dress it to eliminate any wobble. (Fig.9)
6) To assemble, reverse order of assembly. (Fig.10)
Operation
On-Off Switch
Ensure that the switch is in the "OFF" position. If the plug is connected to a receptacle
while the switch is in the "ON" position, the power tool will start operating immediately
and can cause serious injury.
To turn grinder on push switch "I", to turn off push "O".
10