All manuals and user guides at all-guides.com
Back View
LAN Ports
The
provides four 10/
RG54G3
100Mbps RJ-45 ports, allowing
connection to computers and other
network devices.
Power Jack
Connect the enclosed power
adaper to provide power to the
RG54G3.
Connecting Cables
1. To access to the Internet, connect one end of an
Ethernet cable to the WAN port of RG54G3, and the
other end to your xDSL/Cable Modem.
2. For wired connection to the network devices, connect
one end of an Ethernet cable to the LAN port (1~4) of
RG54G3, and the other end to your computers/
devices.
3. For wireless connection, install the wireless adapters
onto your computers, and you have to configure re
spective set tings on your computers (refer to your
wireless adapter's manual) to take full advantages of
the RG54G3.
WAN Port
The 10/100Mbps Ethernet port
provides connection to your xDSL/
Cable Modem or Ethernet devices.
Reset Button
Press and hold (using a
pointed object, such as a
stretched clip) this button
longer than a second to re-
start the RG54G3. Longer
than 5 seconds will reload
the factory default settings.
1-3