Operating Using The Multiple Audio, Subtitle And Angle Osd - Denon S-101 Instrucciones De Operación

ENGLISH
Advanced Operation
NUMBER
ENTER
DISPLAY
2 Changing the elapsed time
NUMBER
Input pressing the
ENTER
button.
Example: For 1 minute 26 seconds Æ "00126"
2 Changing the title, track or chapter
NUMBER
Input pressing the
ENTER
button. (For DVDs)
• For some discs it is not possible to change the title or chapter.
NUMBER
Input pressing the buttons. (For video and
music CDs)
• Playback starts from that track.
Operating using the multiple audio, subtitle
and angle OSD
For DVDs containing audio language, subtitle language and angle
signals, the audio language, subtitle language and angle can be
switched during playback.
2 Switching the audio language
(Multiple audio function)
CURSOR
1
During playback, press the
• A screen with the time display icon (
icon (
(
2
Press the
"
buttons, then press the
• The current "AUDIO", "SUBTITLE" and "ANGLE"
numbers are displayed.
buttons, then press the
3
Press the
"AUDIO".
4
Press the
NUMBER
parameters.
The display turns off when the DISPLAY button is pressed.
DISPLAY
button.
), selection
) and picture quality adjustment icon
) are displayed.
CURSOR
0 or 1 button to select
" icon.
CURSOR •
ª
or button to select
CURSOR
0 or 1 button and the
buttons to select and set the different
39
ENGLISH
• With some discs it is not possible to change the audio language
during playback. In such cases, select from the DVD menus
( page 17).
• If the desired language is not set after pressing the CURSOR
or button several times, the disc does not include that
1 1
language.
• The language selected in the default settings is set when the
power is turned on and when the disc is replaced.
2 Switching the subtitle language
(Multiple subtitle function)
1
CURSOR •
Press the or ª
"SUBTITLE".
2
CURSOR
Press the 0 or 1 button and the
NUMBER
buttons to select and set the different
parameters.
• If the desired language is not set after pressing the CURSOR
or button several times, the disc does not include that
1 1
language.
• The subtitle language set with the default settings is set when
the power is turned on and when the disc is replaced. If that
language is not included on the disc, the disc's default language
is set.
• When the subtitle language is changed, several seconds may
be required for the new language to appear.
• When a disc supporting the closed caption is played, the
subtitle and the closed caption may overlap each other on the
TV monitor. In this case, turn the subtitle off.
Advanced Operation
0 0
button to select
0 0