Valex 1411122-S550E Manual De Uso Y Mantenimiento página 9

All manuals and user guides at all-guides.com
g
W e thank you for having purchased this product that will
hereafter also be called "tool".
WARNING! Before using this electrical tool carefully
read and observe the safety standards and operational
instructions provided hereafter. Make sure that you know
how to stop the tool in the case of emergency before
starting the job.
This jigsaw must only be used for cutting wood, pla-
stics, and metal. Any use that differs from that indicated
in this manual could damage the jigsaw and be hazardous
for the user.
ATTENTION! Carefully keep this instruction handbook in a
safe and handy place so that you can consult it when needed.
1411122 - S550E
DESCRIPTION (FIG. A2)
1 Handgrip
2 Electronic switch
3 Blade guard
4 Cutting blade
5 Adjustable support base.
DESCRIPTION OF INDICATIONS (FIG. B2)
1. Technical data (see relative section)
2. WARNING!
3. Read the instruction handbook carefully before using
this machine.
4. Electric and electronic refuse may contain potentially
hazardous substances for the environment and human
health. It should therefore not be disposed of with do-
mestic waste, but by means of differentiated collection at
specific centres or returned to the retailer in the event of
purchasing a new identical appliance. The illegal disposal
of such equipment may result in prosecution to the full
extent of the law.
CHARACTERISTICS
- Electronic speed adjustment
- Light weight and ergonomic design for easy use.
- Vacuum cleaner coupling.
- Base - adjustable 0° to 45°.
SUPPLY
The pack includes the following items:
- Jigsaw
- N0 1 blade
- Allen key
- Use and maintenance manual (this manual)
TECHNICAL DATA
Power Supply Voltage
Rated power input
Nominal stroke speed (no load) 500-3000 per min
Stroke
Max perpendicular cut in wood
In metal plating
Weight
Insulation class of machine
Acoustic pressure
Acoustic power
Vibration cutting wood
cutting sheet metal
Individual protective earphones must be worn when the
acoustic pressure exceeds 80 dB(A).
1411123 S660EP
DESCRIPTION (FIG. A3)
1 On/Off switch
2 Retainer button
3 Oscillation adjustment wheel
4 Pendulum stroke adjustment
5 Adjustable angle base
6 Motor casing
7 Transparent guard
8 Vacuum cleaner coupling
9 Blade
10 Allen key supplied
DESCRIPTION OF INDICATIONS (FIG. B3)
1. Technical data (see relative section)
2. WARNING!
3. Read the instruction handbook carefully before using
this machine.
4. Electric and electronic refuse may contain potentially
hazardous substances for the environment and human
health. It should therefore not be disposed of with do-
mestic waste, but by means of differentiated collection at
specific centres or returned to the retailer in the event of
purchasing a new identical appliance. The illegal disposal
of such equipment may result in prosecution to the full
extent of the law.
- Electronic speed adjustment
- Light weight and ergonomic design for easy use.
- Vacuum cleaner coupling.
- Base - adjustable 0° to 45°
- Adjustable pendulum stroke.
The pack includes the following items:
- Pendulum Jigsaw
- N° 1 blade
- Allen key
- Guide for parallel cuts
- Use and maintenance manual (this manual)
Power Supply Voltage
Rated power input
Nominal stroke speed (no load)
Stroke
Max perpendicular cut in wood
230V~50Hz
Weight
350 W
Insulation class of machine
Acoustic pressure
18 mm
Acoustic power
55 mm
Vibration cutting wood
6 mm
cutting sheet metal
1,5 kg
II
Individual protective earphones must be worn when the
LpA 81,3 dB(A)
acoustic pressure exceeds 80 dB(A).
LwA 92,3 dB(A)
9
7,7 m/s² K=1,5
12,5 m/s² K=1,5
CHARACTERISTICS
SUPPLY
TECHNICAL DATA
230V ~ 50Hz
500 W
500 - 3000 per min
17 mm
65 mm
2 kg
II
LpA 86,2 dB(A)
LwA 97,2 dB(A)
7,9 m/s² K=1,5
12,7 m/s² K=1,5