Tuning Radio Stations; Discs For Playback; Loading A Disc - Roadstar CLR-2540UMP Manual De Instrucciones

5 English

TUNING RADIO STATIONS

1. Press the FUNCTION button on unit or remote control to select the desi-
red wave band FM.
2. Press 3 seconds SKIP BACK/TUNING- BUTTON (12)/SKIP UP/
TUNING+ BUTTON (14) to start the Radio auto-tuning function (the unit
will search automatically the strongest stations).
3. To search manually a Radio station, when in radio mode press SKIP
BACK/TUNING- BUTTON (12)/SKIP UP/TUNING+ BUTTON (14) se-
quentially until the desired frequency is displayed.
4. To turn off the radio, press the FUNCTION button to switch to other func-
tions or press STANDBY button to turn off the unit.
RADIO STATION MEMORY OPERATION
You may pre-store 20 (FM) radio stations in memory for your preference con-
trolled by remote handset, so as you can listen to your desired station directly
and quickly, no need to tuning and search for again.
1. Press FUNCTION button to FM mode.
2. Press and hold PROG BUTTON (10) on unit or press MEMORY BUT-
TON (15) on remote, "P01 " will flash on the display. Then press M+ BUT-
TON (8)/M- BUTTON (7) to select the desired position.
3. To search another station, repeat steps (2) and (3) until all desired sta-
tions stored. Up to 20 stations can be programmed.
4. Press M+ BUTTON (8)M- BUTTON (7) on unit or (10)/(11) on remote to
listen to the stored station directly.

DISCS FOR PLAYBACK

This system can playback all digital audio CD/MP3, finalized digital audio CD-
Recordable (CD-R) discs, finalized digital audio CD-Rewritable (CD-RW)
discs and CD-DA format digital audio CD/CD-R/CD-RW discs.

LOADING A DISC

1. Press the FUNCTION button on unit or remote control to select CD mo-
de.
2. Press the OPEN/CLOSE button to open the CD door, "OP" will be shown
on the display.
3. Place an audio CD/MP3 DISC into the tray with the front side facing up.
4. Close the CD door. The display will show a flashing "- -", then the total
number of tracks would be shown and the playback will start from track.
5. To remove the CD, press OPEN/CLOSE to open CD door, the display will
show "OP". Hold the CD by its edges, and take it out carefully.
6. Note:
7. Make sure the disc is stopped before opening the CD DOOR.
All manuals and user guides at all-guides.com