Uline H-3788 Manual Del Usuario página 2

1. Remove bolts from ends of spacers. Attach frames to
spacers using two bolts per spacer and the enclosed
allen wrench. (See Figure 1)
2. Adjust levelers on the bottom of the frames to
desired height. Stand unit up.
3. Remove bolts from top end of each post. Slide posts
into holes at the top of each frame. (See Figure 2)
NOTE: Press the button on the inside of the post
before inserting the post into the frame.
(See Figure 2)
PAGE 2 OF 6
ASSEMBLY
4. Align holes in hangrails over holes in posts. Attach the
hangrails to the posts using two bolts per hangrail and
the enclosed allen wrench. (See Figure 3)
Figure 1
5. To attach optional add-on hangrails to the unit, slide
over the tops of the ends of the hangrails of the
assembled clothes racks. (See Figure 4)
Figure 2
Button
1-800-295-5510
uline.com
Figure 3
Figure 4
0421 IH-3788