Switching On / Off
Press the On/Off switch (2). The control light (3)
on the Original BMW headphones lights up when
they are switched on.
If no radio signal is received within 3 minutes
of them being switched on, the Original BMW
headphones switch themselves off automatically.
Channel selection (depending on
the equipment installed)
You can switch between 2 channels by moving
the channel selector switch (4).
Adjusting the volume
Audio playback that is too loud can
damage your hearing (see safety
instructions). To avoid hearing
impairment, set the volume on the
Original BMW headphones to low before
using them.
Turn the volume regulator (5) until the desired
volume is reached.
Storage
When not in use, fold down the ear shells (1)
and store the Original BMW headphones in the
storage bag supplied (2).
Please protect your Original BMW headphones
from direct sunlight.
Cleaning
–
Ensure that the Original BMW headphones
are switched off before cleaning them.
–
Use a lint-free cloth.
–
Do not allow liquid to penetrate the
openings.
–
Do not use spray bottles, solvents, alcohol or
scouring agents.
17