Using The Controller With Cpwi Software - Celestron 94035 Manual De Instrucciones

To connect a PC to the controller wirelessly using the optional
SkyPortal WiFi Module, you will need a Celestron mount and the
WiFi module accessory (sold separately). Plug the WiFi module into
an AUX port on the mount. Connect another AUX port on the mount
to one of the AUX ports on the controller using the supplied AUX
cable. You can also use the included mount power cable to power
your mount from one of the power output ports (Figure 12). Once all
the cables are connected, turn on the mount.
NOTE: If your mount only has one AUX port, you'll need to purchase
the optional AUX Port Splitter. This converts the mount's single AUX
port into two AUX ports.
Fig 12
SkyPortal WiFi Module
PowerTank Lithium Pro
If you are using a Celestron mount with the SkyPortal WiFi Module, you can connect to the
controller via WiFi through the mount using the supplied AUX cable. You can also use the
included mount power cable to power your mount from the power output port.
8. Using the Controller with CPWI
Software
If you are already controlling your telescope or camera from
a computer, you will love controlling the Smart DewHeater
Controller 2x with our free Celestron CPWI software. To
download the latest version, visit: https://www.celestron.com/
pages/celestron-pwi-telescope-control-software
Install the software and open CPWI. Select "Start" if the
opening window appears. Then, click on the "Connection" icon
in the upper-left corner of the screen. If you are using a wired
connection, select "Mount USB." If you are using the SkyPortal
WiFi Module, click on the "Connection" icon and then select
"WiFi."
CPWI should find and connect to the controller. Once connected,
the Dew Heater icon will appear in the selection menu on the left
side of the screen.
Selecting the Dew Heater icon will display the Dew Heater menu.
(Figure 13). The first line in the Dew Heater menu indicates the
total power draw for any devices connected to the controller. To
see more data, click Overview.
Mount Power Cable
AUX Cable
OVERVIEW
The Overview screen displays the power draw for each port on the
controller (Figure 14). The icons beside any ports currently in use
will turn orange with the power draw over time in the small graph
Fig 14
Overview screen
Fig 13
CPWI Dew Heater menu
ENGLISH | 7