Publicidad
Idiomas disponibles
Idiomas disponibles
ENM 2000
9. Never immerse the appliance in water or any other
liquid.
10. Make sure the appliance has been unplugged before
cleaning.
11. This appliance must be installed following the national
regulations for electrical installations.
12. This appliance is for household use only.
13. In case that you need a copy of the instruction manual,
you can find it in www.orbegozo.com.
14. WARNING: In case of misuse, there is a risk of possible
injury.
IMPORTANT
- Do not plug a device if it exceeds 16 Amp.
- Always make sure the device is properly connected to the device.
- If you need to clear the device, unplug it from the mains and wipe with a dry cloth.
- Do not immerse the timer in water or other liquid.
- Radiators and the like should not be left unattended while running. The manufacturer does not
recommend connecting such devices to the timer.
Description
1. Remote control ON/OFF transmitter.
2. Receptor grounding plug.
3. ON/OFF button with indicator light.
Installation
1. Take the double-side sticker, stick one side on rear side of
remote control transmitter.
2. Now look for a suitable place on the wall for transmitter. Ensure it is flat and clean it of any dirt, then
stick firmly transmitter on the wall with double-side sticker on its rear side.
3. Plug receptor to socket, which should be placed within 40 m of transmitter and switch on.
4. You just have to plug any electronic appliance in the socket and use remote control to turn on and turn
off.
This plug doesn't have battery, so that you won't need to remove transmitter from the wall once installed.
Besides, it doesn't need tool for installing.
6
Publicidad
