Video; Audio; Network (Lan); Touchpad - EUROCOM D400K PYTHON Guia Del Usuario Concisa

Video (WinXP)
1. Click Start (menu) > Run
2. Navigate (Browse...) to D:\Drivers\Video\Setup.exe and
click OK.
3. To continue click Next > Yes > Express.
4. Click Finish to restart the computer.
Audio (WinXP)
1. Click Start (menu) > Run
2. Navigate (Browse...) to D:\Drivers\Audio\Setup.exe and
click OK > Next.
3. Click Finish to restart your computer.
4. You can click the AC97 Audio Configuration icon
the taskbar for further configuration options.
5. You can also go to the Sounds and Audio Devices control
panel for further configuration options.
6. Click Start (menu) and point to Settings (or click Control
Panel) and click Control Panel then double-click the
Sounds and Audio Devices icon.
If you are in the Category View, choose Sounds, Speech
and Audio Devices > Sounds and Audio Devices.
All manuals and user guides at all-guides.com
...
...
LAN (WinXP)
1. Click Start (menu) > Run
2. Navigate (Browse...) to D:\Drivers\LAN\Setup.exe and
click OK.
3. To continue click Next.
4. Click Finish, then restart your computer.
5. The network settings can now be configured.
TouchPad (WinXP)
1. Click Start (menu) > Run
2. Navigate (Browse..) to
D:\Drivers\Touchpad\WINXP\Setup.exe and click OK.
in 3. Click Next.
4. Click Finish to restart the computer.
PC Card/PCMCIA (WinXP)
1. Click Start (menu) > Run
2. Navigate (Browse..) to D:\Drivers\PCMCIA\Setup.exe
and click OK.
3. Click Next > Next.
4. Click Finish to restart the computer.
Concise User's Guide
...
...
...
Driver Installation - 25