EUROCOM D400K PYTHON Guia Del Usuario Concisa página 38

Concise User's Guide
Problem
Unwelcome numbers appear
when typing.
I have installed a new external
keyboard or mouse but cannot
use all of the listed functions.
There is no response from the
Wireless LAN or Bluetooth
module.
The PC Camera software
displays a black screen when the
AMCAP software is run.
32 - Troubleshooting
All manuals and user guides at all-guides.com
For Model A only - If the LED
Fn + NumLk key combination (see
You have not installed the driver to enable any extra functions. Make sure you read the
documentation which comes with any new external device, and make sure you install the driver
for it as this will allow you to access any extra functions which come with your device.
Power has not been enabled to the module. See
on page 10.
The driver(s) for the module(s) has (have) not been installed. Make sure you have installed the
driver for the appropriate module.
If you have both the optional PC Camera and TV Tuner modules present, go to the Devices
menu in the AMCAP program and select the PC Camera device.
Possible Cause - Solution
is lit, then Number Lock is turned ON. Press and release the
"Numeric Keypad" on page
"LED Power & Communication Indicators"
11).