Behringer WASP DELUXE Guia De Inicio Rapido página 46

46
WASP DELUXE
WASP DELUXE System Exclusive Commands
*Note: If you use SysEx instead of the recommended A-440
method to turn on the Poly Chain, then the Poly Chain Device ID of
other units in the chain is not set automatically. You have to use
SysEx to set the Poly Chain ID of the first WASP DELUXE to Device
ID=0, the second WASP DELUXE to ID=1, the third WASP DELUXE
to ID=3 and so on. All WASP DELUXE units must have the same
MIDI channel.
Retriggering Style
These examples show the difference between the old and new
retriggering styles
Example
Press and hold note A.
Note A is playing.
Then press and hold
note B. Note B is playing
(A stop). Release note A.
Press and hold note A. Note A
is playing. Then press and hold
note B. Note B is playing
(A stop). Release note B.
Poly Chain Style
These two tables show the difference between old and new poly
chain style.
Poly chain
Old style New style
(v1.0.5) (v1.0.6)
Retrigger No Retrigger
Poly chain
Retrigger Retrigger
Note: Turning on the Poly Chain will affect the note
priority function
TABLE OF NOTE RESPONSE -- Old poly chain style
How many notes are playing
Device
0 1 2 3
no.
1 Off Note1 Note1 Note1 Note1 Note1 Note1 Note1
2 Off Note1 Note2 Note2 Note2 Note2 Note2 Note2
Note1 Note1 Note3 Note3 Note3 Note3 Note3
3 Off
Note1 Note1 Note1 Note4 Note4 Note4 Note4
4 Off
5 Off Note1 Note1 Note1 Note1 Note5 Note5 Note5
TABLE OF NOTE RESPONSE -- New poly chain style
How many notes are playing
Device
0 1 2 3
no.
Off Note1 Note1 Note1 Note1 Note1 Note1 Note1
1
2 Off Off Note2 Note2 Note2 Note2 Note2 Note2
3 Off Off off Note3 Note3 Note3 Note3 Note3
Off Note4 Note4 Note4 Note4
4 Off Off Off
5 Off Off Off Off
4 5 6 7
4 5 6 7
Off Note5 Note5 Note5