Hardware Contents; Safety Information - Kobalt 45601PKDLG Instrucciones De Montaje

HARDWARE CONTENTS

!

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install
the product. If you have any questions regarding the product, please call customer service at
1-888-3KOBALT, 8 a.m. – 8 p.m., EST, Monday - Friday.
WARNING
• PERSONAL INJURY HAZARD: Failure to properly install according to the manufacturer's guidelines
could result in personal injury.
• ELECTRICAL, PLUMBING, OR GAS LINES MAY BE IN WALL: Before cutting, drilling or hammering
verify their location. If needed, contact your electrician, plumber, or service person.
CAUTION
• POTENTIAL EYE HAZARD: Wear protective eyewear during installation.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and diagram above. If any part is missing or damaged, do not attempt to
assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 40 minutes
Tools Required for Assembly (not included): Tape measure, stud finder, pencil, power drill and
3/16 in. drill bit, adjustable wrench, level, 12 mm nut driver, and Phillips head screwdriver.
Ø 8 x 50.8 mm Screw
QTY:12
Ø 4.8 x 15 mm Bolt
QTY:4
3
Ø 4.8 mm Nut
QTY:4