Seat Assembly - WONDERFOLD W4 ORIGINAL Instrucciones De Ensamblaje

Seat Assembly

1. Before placing the seat in the wagon, unbuckle the buckles on the underside of the seat.
Allow the buckles and straps to hang loose until step 3.
2. Place the seat into one end of the stroller. Secure the hooks on both sides of the seat
onto the stroller frame hand rail on either side of the wagon. Make sure that the both
fabric panels between the two parallel seat hooks is stretched flat. Then secure the
seatback hooks onto the stroller frame behind the seat.
3. Connect the four buckles on the underside of the seat to the corresponding buckles
in the well of the wagon as shown in Image 3.
4. Completed seat assembly shown in Image 4.
Basket Assembly
1. Connect the basket tube to the fixed plastic part under the handle bar tube.
2. Assembly completed as per picture 2.
6
Canopy Assembly
1. Insert the canopy pole into the frame on four corners.
Handle Strap Assembly
1. Take the handle strap from the bottom of the frame located in the front.
2. Fix the handle strap onto the front connecting tube.
3.Use as shown in picture 3.
7