When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the
following:
1. Read all instructions.
2. This appliance is not intended for use by persons with reduced physical,
sensory, or mental capabilities, or lack of experience and knowledge,
unless they are closely supervised and instructed concerning use of the
appliance by a person responsible for their safety.
3. This appliance shall not be used by children. Keep the appliance and its
cord out of reach of children.
4. Close supervision is necessary when any appliance is used near children.
Children should be supervised to ensure that they do not play with the
appliance.
5. To protect against risk of electrical shock, do not put cord, plug, base, or
motor in water or other liquid.
6. Turn the appliance OFF( ), then unplug from outlet when not in use,
before putting on or taking off parts, and before cleaning. To unplug, grasp
the plug and pull from the outlet. Never pull from the power cord.
7. Avoid contact with moving parts.
8. Do not operate any appliance with a damaged supply cord or plug, or
after the appliance malfunctions or has been dropped or damaged in any
manner. Supply cord replacement and repairs must be conducted by the
manufacturer, its service agent, or similarly qualified persons in order to
avoid a hazard. Call the provided customer service number for information
on examination, repair, or adjustment.
9. The use of attachments, including canning jars, not recommended or sold
by the appliance manufacturer may cause a risk of injury to persons.
10. Do not use outdoors.
11. Do not let cord hang over edge of table or counter or touch hot surfaces,
including stove
2
All manuals and user guides at all-guides.com
IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS
12. Do not place on or near a hot gas or electric burner, or in a heated oven.
13. Keep hands and utensils out of the jar and away from the cutting
blade, while blending or chopping food, to reduce the risk of severe
personal injury and/ or damage to the blender or available attachments
(attachments may not be provided with blender). A rubber spatula may be
used but must be used only when blender is not running.
14. Blades are sharp; handle carefully— especially when emptying or
cleaning the blender jar.
15. Do not use a broken, chipped, or cracked blender jar.
16. Do not use broken, cracked, or loose cutting blade assembly.
17. Always operate blender with cover in place.
18. Do not use appliance for other than intended purpose.
19. Do not leave blender unattended while it is operating.
20. Check that the appliance is OFF ( ) before plugging cord into wall outlet.
To disconnect, turn the control to OFF ( ); then remove plug from wall
outlet. To unplug, grasp the plug and pull from the outlet. Never pull from
the power cord.
21. CAUTION! In order to avoid a hazard due to inadvertent resetting of the
thermal cut-out, this appliance must not be supplied through an external
switching device, such as a timer, or connected to a circuit that is
regularly switched on and off by the utility.
22. If the jar should twist or rotate when the motor is switched ON, switch
OFF ( ) immediately and tighten jar in collar or on blender base.
23. Ensure cutter assembly is tight and secure to jar. Injury can result if
moving blades accidentally become exposed.
24. Do not blend hot liquids.