Assembly; Unfolding The Stroller/Assembly Of Front Wheel/Assembly Of Rear Wheel; Assembly Of Rear Wheels/Assembly Of Handle Bar/Canopy Assembly - WONDERFOLD W2 Instrucciones De Ensamblaje

Assembly

Unfolding the Stroller
1. Stand with hands on front and rear frame tube, and unfold the stroller frame to
front and rear position.
EN
2. Stretch out the fabric flaps to both sides of the hand rail to cover the joint on both
sides.
Assembly of Front Wheels
1. Insert front wheels into front wheel housing.
2. Front wheel assembly completed. Pull the front wheel to be certain that wheels are
securely locked in place.
Assembly of Rear Wheels
1. Insert the wheel axle in the brake assembly as picture 1.
2. Insert the buckle into the rear wheel housing as picture 2.
Pull the rear wheel axle to make certain that rear wheel assembly is secure.
4
Assembly of Rear Wheels
1. Connect the rear wheel to the rear tube joint.
2. Check the clips are in place on both sides of the wheel housing.
Assembly of Handle Bar
1. Screw the handle bar tube to the adjust joint using screws .
2. Tighten the screws on both sides.
Canopy Assembly
1. Connect the canopy tube to the rail on four corners.
2. Assembly of canopy is finished.
EN
5