2. Insert left frame over socket behind deck lip. Secure
using long bolt, washer and locknut. Connect right
frame to left frame. Circular tab will click into place.
Attach right frame to deck in same manner as left
frame. (See Figure 2)
Figure 2
3. Attach supports to top of left and right frames by
aligning top of supports inside brackets on left and
right frames and securing with long bolts, small
washers and locknuts. (See Figure 3)
Figure 3
PAGE 2 OF 6
ASSEMBLY CONTINUED
4. Attach supports to deck by aligning bottom of
supports inside brackets on left and right frames and
securing with long bolts, small washers and locknuts.
(See Figure 4)
1-800-295-5510
uline.com
Figure 4
0321 IH-7442