SMC Networks SMC7004VBR Manual De Instalación Rápida página 18

SMC7004VBR_QS.joint.qxd 19/9/02
Netscape
1. Open Netscape and click the stop button. Click "Edit" and select
"Preferences."
2. In the "Preferences" dialog box, In the left-hand column
labeled "Category," select "Advanced." Under the "Advanced"
category, select "Proxies."
3. Select "Direct Connection to the Internet" and click OK
Step 3. Obtain IP Settings From Your Barricade
Now that you have configured your computer to connect to your
Barricade, it needs to obtain new network settings. By releasing
any old IP settings and renewing them with settings from your
Barricade, you will also verify that you have configured your
computer correctly.
12:43 pm Page 35
1. Pull down the Apple Menu. Click "Control Panels" and select
TCP/IP.
2. In the TCP/IP window, your new settings will be shown. Verify
that your IP address is now 192.168.2.xxx, your Subnet Mask is
255.255.255.0 and your Default Gateway is 192.168.2.1. These
values confirm that your Barricade is functioning.
3. Close the TCP/IP window.
Now that your computer is configured to connect to your Barricade,
please skip to "Configuring Your Barricade".