Safety Recommendations; Ambient Conditions; Work Place - Valsir MUSTANG 160 V2 Manual De Uso Y Mantenimiento

5. Safety recommendations

Safety labels which you may find in this handbook:
EN
You are strongly urged to comply strictly with legal requirements concerning job safety
and accident prevention in the work place. The structural features and usage of the
welding equipment make it essential to pay particular attention to the following
recommendations:

5.1 AMBIENT CONDITIONS

5.2 WORK PLACE

5.3 OPERATOR'S PRESENCE DURING WELDING
5.4 CRAMPED SPACES
5.5 BURNING HAZARD
5.6 ELECTRICAL HAZARD
14
Indicates an imminent dangerous situation that may cause
death or serious injuries, if ignored
Indicates a potentially dangerous situation that may lead to
death or serious injuries, if ignored.
Indicates a dangerous situation that may lead to minor or
moderate injuries, if ignored.
Indicates a behaviour that might damage the machine or
eventually become dangerous to people.
Application hints or other useful information.
Do not use the equipment in wet environments.
Make sure that the work place is inaccessible to
unauthorized persons.
Do not leave the equipment unattended during welding
operations.
If it proves necessary to work in cramped spaces, it is
compulsory to have a person on hand outside to help the
operator in case of need.
The electric melting process involves the reaching of high
temperatures in the welding area. Do not touch the
coupling or joint during the welding and cooling phases.
Protect the equipment from rain and/or damp/trenches;
use only pipes and couplings that are perfectly dry.